Top CCNA Job Interview Questions and Answers - For Fresher & Experienced

Candidates who are going to appear in CCNA Interview they need to know about which type of question will be asked by the interviewer.
Many CCNA students are having good knowledge of networking, but they are not aware of the questions that can be put up, by an interviewer in order to check their ability. Here we are providing a comprehensive list of the most popular CCNA interview questions and answers for students help, let’s have a look..!!
  1. What is Routing?
  2. Answer: Routing is the process of finding a path on which data can pass from source to destination. Routing is done by a device called routers, which are network layer devices.
  1. What is routing on a network?
  2. Answer: This might seem like a basic question, but the interviewer might ask it just to see if you know the basics. Routing is done by routers. Routers have a routing table that sends network traffic from one location to another location or segment on the network. Routers reduce network traffic compared to regular hubs. When a user sends network traffic across the network, a hub broadcasts to all segments of the network. With a router, the device analyzes the TCP/IP packet, sees the destination location, and then uses its lookup table to route the packet to the right network segment and destination. Switches also route traffic in a similar fashion.
  1. What is 100BaseFX?
  2. Answer: This is Ethernet that makes use of fiber optic cable as the main transmission medium. The 100 stands for 100Mbps, which is the data speed.
  1. Is it better to add a network segment to a growing network or continue to use the same subnet mask?
  2. Answer: Growing networks start to suffer from network congestion. When you segment the network, routers are better able to route traffic to specific parts of the network without broadcasting signals across only one segment. When you reduce broadcasting, you lower congestion, which speeds up your network. With a growing large network, it’s better to start segmenting the network and create subnet masks for different segments.
  1. What is the purpose of the Data Link?
  2. Answer: The job of the Data Link layer is to check messages are sent to the right device. Another function of this layer is framing.
  1. What is network congestion?
  2. Answer: With all of the streaming applications and peer to peer software, network congestion is common on a large network. Network congestion occurs when too many people are trying to use limited bandwidth. Most companies have a limited amount of bandwidth they can use before they pay extra, which is why companies limit bandwidth by blocking streaming and peer to peer applications using firewalls.
  1. Differentiate User Mode from Privileged Mode
  2. Answer: User Mode is used for a regular task when using a CISCO router, such as to view system information, connecting to remote devices, and checking the status of the router. On the other hand, privileged mode includes all options that are available for User Mode, plus more. You can use this mode in order to make configurations on the router, including making tests and debugging.
  1. What are data packets?
  2. Answer: Data packets are the encapsulation units that transmit information across a network. A data packet contains the sender’s information, the recipient’s information, and the data contained. It also contains the numeric identification number that defines the order and packet number. When you send data across the network, that information is segmented into data packets. The recipient then puts these packets together to be able to read the information. Basically, data packets contain the information and routing configurations for your transferred message.
  1. What is the key advantage of using switches?
  2. Answer: When a switch receives a signal, it creates a frame out of the bits that were extracted from that signal. With this process, it gains access and reads the destination address, after which it forwards that frame to the appropriate port. This is a very efficient means of data transmission, instead of broadcasting it on all ports.
  1. What is the difference between RIP and IGRP?
  2. Answer: When you send traffic on a network, the router (default gateway in Windows computer terminology) determines how to route the traffic. RIP determines where to send the traffic by determining the shortest amount of “hops.” A hop is a next router in the traffic’s path. Each router is considered a hop. With IGRP, several more factors are considered. IGRP takes into consideration the bandwidth availability, MTU, reliability and a number of hops.
  1. What is the function of the Application Layer in networking?
  2. Answer: The Application Layer supports the communication components of an application and provides network services to application processes that span beyond the OSI reference model specifications. It also synchronizes applications on the server and client.
  1. Define bandwidth in terms of network architecture
  2. Answer: While the term bandwidth is thrown around for most basic networking speeds and capacity, bandwidth is technically the data capacity of a network. It measures the volume of data for a transmission connection. Bandwidth is measured in kilobits per second or “Kbps.”
  1. When does network congestion occur?
  2. Answer: Network congestion occurs when too many users are trying to use the same bandwidth. This is especially true in big networks that do not resort to network segmentation.
  1. What is the Application Layer in network connectivity?
  2. Answer: The Application Layer is what your developers and software used to send traffic across the network. The Application Layer is especially important for synchronizing software between the server and the client machine.
  1. What is BootP?
  2. Answer: BootP is a protocol that is used to boot diskless workstations that are connected to the network. It is short for Boot Program. Diskless workstations also use BootP in order to determine its own IP address as well as the IP address of the server PC.
  1. What is subnetting on your network?
  2. Answer: Subnetting is a way to segment your network into smaller “groups.” Subnetting is accomplished by manipulating the subnet mask, which is distributed to desktop computers and routers. Subnetting allows you to create smaller networks within your network, which then reduces congestion on larger networks.
  1. What is a Window in networking terms?
  2. Answer: A Window refers to the number of segments that is allowed to be sent from source to destination before an acknowledgment is sent back.
  1. What is the difference between user mode and privileged mode on a Cisco router?
  2. Answer: These two modes are somewhat self-explanatory. The user mode allows the user to view router status and basic system information. With privileged mode access status, the router can be configured and all status messages and errors can be viewed. User mode and privileged mode separates standard users on the network and network administrators who need to not only view router status but also make changes to the router’s configurations.
  1. What are the different memories used in a CISCO router?
  2. Answer: NVRAM stores the startup configuration file
    DRAM stores the configuration file that is being executed
    Flash Memory – stores the Cisco IOS.
  1. What is network latency?
  2. Answer: Network latency refers to the performance of one device when it communicates with another. Network latency is affected by bandwidth speeds, network card performance, cabling, and congestion. High latency can also mean users won’t be able to properly communication with applications, which will “time out” if latency is too high.
  1. Does a bridge divide a network into smaller segments?
  2. Answer: Not really. What a bridge actually does is to take the large network and filter it, without changing the size of the network.
  1. What does MTU stand for?
  2. Answer: MTU stands for “Maximum Transmission Unit.” When you configure a router, a default MTU is set. MTU determines the maximum size of a packet that is sent across the network. You can increase MTUs across the network, but this setting generally slows down the network compared to smaller MTU settings. Some network applications require larger MTU sizes, and that’s when you need to manually configure MTU sizes on your routers.
  1. How does RIP differ from IGRP?
  2. Answer: RIP relies on the number of hops in order to determine the best route to a network. On the other hand, IGRP takes consideration many factors before it decides the best route to take, such as bandwidth, reliability, MTU and hop count.
  1. What is the difference between full duplex and half duplex devices?
  2. Answer: A full duplex device is preferable because a full duplex device can send and receive data packets simultaneously. However, with a half-duplex device, the device must finish receiving a message before it can then send a message. This can lead to slower transmission speeds and increase network latency.


Popular posts from this blog

Download IOS Image for Router

tcpdumps in Checkpoint Firewall